VAF Forums

VAF Forums (https://vansairforce.net/community/index.php)
-   Autopilots (https://vansairforce.net/community/forumdisplay.php?f=37)
-   -   Add-on Autopilot (https://vansairforce.net/community/showthread.php?t=174338)

shefferm 08-16-2019 01:33 AM

Add-on Autopilot
 
I plan to add Dynon auto pilot, including 2 servos to my already flying RV-7
Is it possible to install the wing servo just by using the inspection panel?
Anybody tried that?

Mike
Flying proudly my RV-7

RV10Man 08-16-2019 03:21 AM

My brother added auto pilot to his flying 9A. He actually mounted the servo in the wing tip. Then installed a pushrod in to the bellcrank.

Rodney 08-16-2019 04:24 AM

Added servo in right wing
 
Good day,

I added the roll servo in the right wing through the inspection panel.
Wasn?t a hard job at all. In fact one of the easier installations I?ve made.
Just followed the instructions
Rodney

olyolson 08-16-2019 06:48 AM

Dynon Roll Servo
 
Mike,

I did just that- mounted the Dynon roll servo through the existing inspection panel on the bottom of the right wing.

Brantel 08-16-2019 06:50 AM

Many have done it. Easy peasy!

Jpm757 08-16-2019 07:20 AM

Me too, no problem mounting through inspection access hole.


All times are GMT -6. The time now is 05:05 PM.