VAF Forums

VAF Forums (
-   RV-14 (
-   -   ELT Install (

ShortSnorter 12-20-2020 06:43 AM

ELT Install
Does anyone have a pdf of Section 53 they can share with me?

MED 12-20-2020 07:25 AM

PM sent. :)

ShortSnorter 12-20-2020 09:12 AM

Thanks Mark! 12-21-2020 12:06 PM

Watch out for the Pin connections for the power / RS232 connector. I noticed a difference between the Vans Pin connection in their instructions versus the ACK pin out drawing in there manual. I just got info back from Vans and their plans are wrong. Use the Pin out from the ACK ELT install manual.

h2oskibilly 01-30-2021 04:51 PM

ELT connection
Has anyone found a better way of connecting the ELT Din pin to the Vans supplied harness other than using the molex pins. If it works I guess it ok, but it just seems there should be a better way of making this connection?

mturnerb 01-30-2021 05:01 PM

I used high density D-Sub female connectors - they fit the pins pretty well and worked better for me than the micro molex ones.

Not recommending you do the same but worked better for me.

Blog post here: 01-31-2021 08:10 PM

Think you posted wrong link

All times are GMT -6. The time now is 01:11 PM.