What TruTrak servo size in your RV-8?

I'm running an old TruTrak DFC-250 in my RV-8 and need to upgrade. My challenge is that my servos are really suited to an RV-10 as I have a "C" servo for pitch and an "HB" (high torque w/ clutch) servo for roll.

This was fine with the old DFC-250 since it had configurable torque setting.

What TruTrak servos are other RV-8 pilots flying?

For relative comparison, the following are pretty close:

TT "C" servo; Dynon SV42; MGL servo

TT "B" servo; Dynon SV32

My P/N is DSB-B for both Pitch and Roll. I also have installed the SB to "Safety" the ARM.