Has anyone gotten positive results from installing the pulsation dampener (damper) mentioned in the FloScan documentation? I have the FF sensor installed on the firewall between the gascolator and the mechanical fuel pump. There is at least 8" of straight tubing going into the sensor. the output is a softly curving hose. When I turn on the electric fuel pump I get a 5-7 gph steady state increase in indicated fuel flow.
I searched the archieves and only found the pulsation dampener (damper) mentioned a couple of times. One person said it did not help his situation.
Thanks for any help.
I searched the archieves and only found the pulsation dampener (damper) mentioned a couple of times. One person said it did not help his situation.
Thanks for any help.