View Full Version : Dynon roll servo in a 8

03-28-2010, 03:02 PM
Hi fellas,
Quick question can you mount the Dynon roll servo for the 8 under the foot well as you can the Trutrack?

Scott Hersha
03-28-2010, 07:18 PM
That's where mine is - using the TruTrak mounting bracket. It bolts right in the same holes. You'll have to trim one of the floor stiffeners for clearance, or just turn in around so the flange is oriented the other way.

03-28-2010, 07:20 PM
Thank You Scott!