using a-600 reservoir?

I am putting the a-600 resevoirs on an rv-6 and have a question about plumbing. Do I use 4 resevoirs(one on each master), and the plumb the outlets with a tee then going to the caliper? I am not sure of the original configuration as they were removed prior to my involvement with this project.

Thanks,

BUZ

You only need two. The A600s replace the firewall mounted reservoir and lines running to the masters. Nothing else in the setup changes. One thing to be aware of is the interference between the two A600s as the pedals swing back and forth. You might have to play around with the washers on the master cylinders to get the clearance up to an acceptable level (1/4 inch or so at least.)

As long as you're under there, it might be a good time to evaluate whether you really need brakes on both sides. If not, save a few pounds and some more potential leaks and rip the right side brakes out. Just a thought.