ronschreck
Well Known Member
I just installed my MT8000FA and it seems to work fine on initial power up, but after sending one or two packets the green light goes out and it never sends another packet until I cycle the power switch, then it shuts down again after sending one or two packets.
I read that some were having trouble if the MV-12 power regulator was located to close to the tracker. I moved it about 3 inches away. Do I need to move it further away? Any other ideas?
I read that some were having trouble if the MV-12 power regulator was located to close to the tracker. I moved it about 3 inches away. Do I need to move it further away? Any other ideas?
