What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

mounting lightspeed ignition in a -8

flyingbeaver26

Active Member
I'm trying to plan ahead where I'm going to mount the LSE plasma 2+ ignition control box. In the RV-8, things are tight. I had seen one guy mount his above the electric fuel pump just in front of the gear tower? Does anyone have a picture of this type of install? Any other mounting location pictures would also be appreciated.
Thanks,
-Brad

RV-8 FWF
 
Last edited by a moderator:
Brad,

This is where I mounted mine. I have 4 hours on the airplane and with that limited amount of flying, I can tell you that I haven't had any issues with this installation.

Mark


LightSpeed.jpg
 
Back
Top