GRT Horizon I software posted
GRT has posted v.29e of the Horizon I software.
http://www.grtavionics.com/Downloads
GRT has posted v.29e of the Horizon I software.
http://www.grtavionics.com/Downloads
Changes in VERSION 29e (2007-06-01)
* Added local time offset to add to UTC/Zulu time when displaying on the screen
* Hide A/P-HDG and A/P-NAV indicator when lateral autopilot functions are disabled
* Resist loss of ILS Tuned
* Added "ILS Disconnect" notice
* Added a block box around obstacles to make them show up against terrain
* Read RPM2 correctly and start reading N2 from EIS software version 56
* Fixed showing a fuel pressure dial with decimal scaling
* Rescale the oil temperature bar graph when the temperature units are Celsius
* Fixed showing the label "SAP CRS" when not tracking SAP (not in a GPS NAV MODE)
* Fixed MAP page trying to show the name of an object that has no name
* Prevent problems configuring the serial ports and dimmer on boot
* Add missing 1-mile markers on the extended centerlines for the high ends of runways
* Don't send a frequency to the SL30/SL40 if the function is cancelled
* Scroll the checklist more if the selected item wraps off the screen
* Prevent the selected altitude from indicating missed approach when vertical
autopilot functions are disabled
* Fixed logbook knobs not increasing numbers in the same direction
* Fixed display of analog GPS vertical deviation indicator (glideslope)
* Use ground speed for MPG calculations
* Use configured units for MPG calculations
* Always use correct units for fuel flow in SFC calculation
* Change the first push of the left knob to also activate the left knob function.
Now the left knob function will remain active and the menu will remain on the screen.
* Added cycling version of Ext A/P HDG Mode Select for momentary push buttons
* Added analog function for synchronizing the selected heading with the current heading
* Added external dimmer input
* Added digital vertical speed indicator as PFD data box option
* Increased output rate of some GPS ARINC labels to support more autopilots
* Disable the "No Climb" alarm when vertical speed exceeds 150fpm
* Avoid warning about going under obstacles, such as during an approach
* Blank SFC when percent power is below 40% (SFC is not accurate below 40%)
* Added filtering to MPG, SFC, endurance, and range
* Fixed flickering of flaps/trim in systems with 3 or more display units
* Changed Fuel/Air Data to use the new fuel used statistic
* Prevent sending an invalid fuel used field in the Fuel/Air Data message
Last edited: