PDA

View Full Version : GSA 28 lever hole


g zero
02-07-2017, 08:26 PM
Installing a GSA 28 roll and pitch servos in my 8 . Looking thru the forums there is some vague info on what hole in the servo lever to install the heim joint . All the Garmin Pics show it in the outer hole . Where in the Garmin install info does it mention what hole to use ?

g3xpert
02-08-2017, 05:22 AM
Installing a GSA 28 roll and pitch servos in my 8 . Looking thru the forums there is some vague info on what hole in the servo lever to install the heim joint . All the Garmin Pics show it in the outer hole . Where in the Garmin install info does it mention what hole to use ?

Hello g_zero,

The RV-8 pitch servo drawing on page 15-29 of the Rev. AA installation manual has a note that says to use the outer hole for the pitch servo arm.

The RV-8 roll servo drawing on page 15-30 has a note that says to use the middle hole for the roll servo arm.

Let us know if you have additional questions.

Thanks,
Steve

g zero
02-08-2017, 05:45 AM
Thanks for the help .
Tom A