Manchu16
Well Known Member
I currently only have a Hobbs meter and I use the Vans Tach gauge (No Tach Time). Getting ready to add a new engine monitor and replace my steam gauges. I will now have Tach time in addition to Hobbs. Currently Engine and Airframe are at 392 Hobbs Hours. So, do I….
* Start with “0” Tach Time
* Start with Tach Time = Hobbs Time
* Estimate 80% of Hobbs time (313 Hrs) and start there
* Just dont use Tach Time at all
* Start with “0” Tach Time
* Start with Tach Time = Hobbs Time
* Estimate 80% of Hobbs time (313 Hrs) and start there
* Just dont use Tach Time at all