Well, it’s that time of year again! If you’re at the show, and you feel like posting a note on what you’re seeing, who you’re visiting with, what news you’re picking up, please consider sharing it with us in this thread. You can upload up to 10 pictures in each reply, and you can do it all from...

Added here up top as I get them - a thread where OSH’24 RV activities can be summarized in one spot. If your RV group has an event you would like me to add to this list, just add a reply to this thread and I'll add a bullet point here in the first post. If you have an event that is going to...

...getting it started. v/r,dr

I have a circular crack & separation, around the muffler on my Vetterman cross-over Exhaust. O-360. RV7a. 10-years old with 800 hours (600 hours in the last 3 years). Have left phone messages, texts, and email to Vetterman with no response at all. I would like to get this fixed or replaced...

I was digging around on Amazon and found what looks like an improved exhaust spring for the 912 exhaust system. These stainless steel springs are made for motorcycle exhaust and have swivel ends. I’m not sure if length is correct, but at $5.49 for two springs, I’m going to buy a set for...

I'm ready to close up my wings on my -14 and am a bit flummoxed as to how to buck the aft rivets in the center of the lower skin since my arms and those of my helpers are not 6 ft long. Any tricks appreciated. The photo shows where I am talking about marked in green.

Pushed out every now and then.