[Bavafa]

Just wondering what is the standard guidelines for mounting the inlet/outlet fitting to the fuel pump which has an ORing. How tight should they be done?

 

[Tony Kirk]

O-Ring Boss Fitting Torque

This thread will answer your question...
http://www.vansairforce.com/community/showthread.php?t=126284

Torque info from Lycoming...
https://www.lycoming.com/sites/default/files/SSP-1776-4%20Table%20of%20Limits%20-%20Complete.pdf

 

[swisseagle]

As ALWAYS with such questions, look first here:

Chapter 5 from Vans Aircraft
http://www.vansaircraft.com/pdf/revisions/RV-ALL_05.pdf

Chapter 5.27

They improved and enhanced the information in the past, so that it is THE MANUAL for building an RV.

 

[Bavafa]

Thank you all for providing the info. At first I could not believe the 23-24 FT LB torque as it seems a lot but considering that is listed at two places, it trust it now not to be a typo.

 

[Scott Hersha]

Here’s the table from Lycoming that lists it. Post #2, bottom table:

https://vansairforce.net/community/showthread.php?t=126284