Shortly after my CI (during which I checked and re-installed the fuel inlet strainer), I noticed some blue staining under the fuel line inlet on my MA4SPA carburetor. Tried ensuring everything was nice and snug, but the leak appears to have persisted or even slightly worsened. Wondering if anybody else has had this leak and how they tackled it. I did use the correct new copper gasket and specified torques. I am considering removing the fitting and tightening down the 45 degree AN823-6D elbow that is attached to it, in case the leak is there. I believe that fitting used some Pematex #2, but will need to double-check.
Thanks
Chris
Thanks
Chris