vlittle
Well Known Member
Here is a preview of the beaconX controller that we developed based on the open-source huVVer-AVI devices. I have moved this from another thread, in order to focus on this one application.
Status: The software/hardware combination is ready for flight testing. Lab testing has been successful— the photo below shows the XP status returned from a tailBeaconX transponder after Altitude and Mode info was sent by the controller.
The test bird uses a Dynon D10A, but most common serial altitude streams can be used.
The huVVer-AVI is available in both a 2” and a 3” version to fit (or retrofit) easily. I will provide the software load directly. Right now, only for Beta trials, but a full release will come later.
Vern
Status: The software/hardware combination is ready for flight testing. Lab testing has been successful— the photo below shows the XP status returned from a tailBeaconX transponder after Altitude and Mode info was sent by the controller.
The test bird uses a Dynon D10A, but most common serial altitude streams can be used.
The huVVer-AVI is available in both a 2” and a 3” version to fit (or retrofit) easily. I will provide the software load directly. Right now, only for Beta trials, but a full release will come later.
Vern