WTB: JPI 800 2" model

[jquayle]

Didn't know they even made a 2" version until I just got off the phone with JPI.

Hoping someone has one sitting on a shelf.


Thank you,

JQ

 

[Aerodon]

If you mean 2.25" , then yes I have a couple. With or without all the stuff that goes with it? I have a 3.125" EDM700 with fuel flow and several EDM700's. These are generally trade-ins for upgrades, some are factory refurbished units (new displays). And I have all the JPI transducers and wiring harness you may ever need, new and used.

The EDM700 with FF is a still a very nice instrument, and as long as you get nice probes and harnesses, nothing wrong with installing in 2024.


Don

 

[jquayle]

Looking to replace a JPI 711 and the company told me an 800 would be a drop in replacement and use all of the existing harnesses we already have in place. The main reason for this is to get a USB port for offloading engine data instead of having to use the 9pin parallel port required of the 711.

 

[Aerodon]

The USB port is an option on any EDM700 or 800. The 711 is a 'hard limit' unit programmed for replacing OEM CHT, Oil T and maybe TIT?. All use the same P1 and P2 harness, you need to add P3 harness for FF and I think P4 harness for MP and RPM to get all the functions foran EDM800. These are forward compatible to an EDM730/830 and somewhat compatible with EDM900/930.

Don

 

[jquayle]

Thank you for the info.