pmccoy
Well Known Member
I am trying to make my own headset, based on an old thread I read here. I purchased a mic and plug form Aircraft Spruce
( http://www.vansairforce.com/community/showthread.php?t=20917&highlight=.206 )
Noise-Canceling Microphone. Fits all C40 Model Headsets (David Clark, Softcomm, Telex, etc.) Part No. 11-04838 $19.85
.206" COMMERCIAL MIC PLUG - (S-267) (PJ-068) Mates with JJ-033, S-12B, CES830. Black plastic handle with .206" dia. chrome plug. 3 conductors. solder plug and cable clamp. P/N 11-00702 $6.50
I will also use a set of NR-10 Comply Comfort earplugs.
My problem comes in the wiring on the mic to the plug. The mic has two wires. My first try was to put one wire to the 'Tip', the second wire to the 'Ring' and solder the shield to the 'Ground'. This didn't work.
Anyone have another idea on how to wire the mic to .206 plug???
Ideas would be appreciated.
( http://www.vansairforce.com/community/showthread.php?t=20917&highlight=.206 )
Noise-Canceling Microphone. Fits all C40 Model Headsets (David Clark, Softcomm, Telex, etc.) Part No. 11-04838 $19.85
.206" COMMERCIAL MIC PLUG - (S-267) (PJ-068) Mates with JJ-033, S-12B, CES830. Black plastic handle with .206" dia. chrome plug. 3 conductors. solder plug and cable clamp. P/N 11-00702 $6.50
I will also use a set of NR-10 Comply Comfort earplugs.
My problem comes in the wiring on the mic to the plug. The mic has two wires. My first try was to put one wire to the 'Tip', the second wire to the 'Ring' and solder the shield to the 'Ground'. This didn't work.
Anyone have another idea on how to wire the mic to .206 plug???
Ideas would be appreciated.