I'm getting ready to do the tanks on my 9A and have a question. I've read the article Rick6A wrote and that's how I believe I'm going to proceed. The question is that it seems to me that using the tubes of sealant that Van's sells would be easier than using/mixing out of the quart cans. With that in mind I have two questions;
1. The time on the tubes is 1/2 hour vs. the 2 ? hours on the quart version.
2. Approx. how many tubes to do the tanks?
While I know that the tubes are more expensive, it seems that it would be less messy, though a little more expensive, than the quarts. I do have access to a semco sealant gun, though I've never used one.
Any help will be appreciated.
Thanks
Paul Rose
RV-9A 91300
Wings
1. The time on the tubes is 1/2 hour vs. the 2 ? hours on the quart version.
2. Approx. how many tubes to do the tanks?
While I know that the tubes are more expensive, it seems that it would be less messy, though a little more expensive, than the quarts. I do have access to a semco sealant gun, though I've never used one.
Any help will be appreciated.
Thanks
Paul Rose
RV-9A 91300
Wings