Allan Stern
Well Known Member
I am having a problem with the calibration of my right fuel tank. I go into the Calibration page on the GX3 and have filled the tank with various quantities of fuel, saving the calibration points into the system and saving all the data.
When I exit/reboot the unit and go to the main page, the right fuel tank is reading 0 fuel. Go to calibration, says it is calibrated. The Left tank has no problems and was calibrated same way. The fuel sender is grounded to the fuel tank and we know the wire is good as it calibrates. But again does not register any fuel quantities. And in flight it occasionally will come on and register fuel quantity.
This has stumped Stein Avionics which built my panel. So I am seeing in anyone with another 14 has had any similar problems. Or might be able to offer me some ideas as to what to look at.
Thanks
RV 14A 140507 flying
2020 donation made
When I exit/reboot the unit and go to the main page, the right fuel tank is reading 0 fuel. Go to calibration, says it is calibrated. The Left tank has no problems and was calibrated same way. The fuel sender is grounded to the fuel tank and we know the wire is good as it calibrates. But again does not register any fuel quantities. And in flight it occasionally will come on and register fuel quantity.
This has stumped Stein Avionics which built my panel. So I am seeing in anyone with another 14 has had any similar problems. Or might be able to offer me some ideas as to what to look at.
Thanks
RV 14A 140507 flying
2020 donation made