Phil,prkaye said:Hi AX-O,
Great looking job on your empennage! It looks from the photos that you primed along the rivet lines along the outside... or am i mistaking what I'm seeing?
If you did prime there, do you plan to remove the primer along these rivet lines later, and re-prime the whole thing prior to painting? Did you just do this to prevent corrosion on the HS along the rivet lines while it's in storage? I've thought about doing this myself...
Thanks,
Phil
prkaye said:Did you use a self-etching primer?
Will you have to sand it off, or will paint-thinner or something take it off?
prkaye said:I use a similar primer (self-etching rattle-cans).
Another thing I've found is that primer removes primer!! Spray a new coat of primer over existing primer, and while it is still wet wipe with a paper towel. All the primer seems to rub off easily. Again, not sure if this would change after the primer had been there for several days.