I mis-drilled a skin-to-rib hole very slightly about mid-chord on my HS. The hole is slightly oblong by about 1/32" (used an accurate rule to measure).
Do I need to drill this oversize and use an 'oops' rivet - or will the standard size rivet expand enough to mitigate the damage?
This is the only hole I've messed up on. The problem won't cause any appearance issues and my gut feeling is to just ignore it - there's 8 million rivets back there and this is just one. But I'd like a second (and third) opinion...
Do I need to drill this oversize and use an 'oops' rivet - or will the standard size rivet expand enough to mitigate the damage?
This is the only hole I've messed up on. The problem won't cause any appearance issues and my gut feeling is to just ignore it - there's 8 million rivets back there and this is just one. But I'd like a second (and third) opinion...