Working through some cable/hose management ideas for my build. I've seen some ideas of using Adel clamps or making similar clamps out of scrap aluminium but these require you to rivet or run a bolt through ribs, jstiffners ect. I have somewhat of a concern about drilling through these things.
Has anyone had any success using a standard self adhesive zip tie base?
I've used these on a number of non aviation applications. Over time they come off, so I would probably use something like G/flex to bond them in place, but after that it's just a matter of using zipties to manage hoses, wires, ect.
Thanks for any input.
Has anyone had any success using a standard self adhesive zip tie base?
![01-adhesive-base_red-cable-tie.jpg](/community/proxy.php?image=http%3A%2F%2Fimages1.cableorganizer.com%2Fadhesive-clips-bases%2Fimages%2F01-adhesive-base_red-cable-tie.jpg&hash=60e6128f1a4479a5067f058a19bdebab)
I've used these on a number of non aviation applications. Over time they come off, so I would probably use something like G/flex to bond them in place, but after that it's just a matter of using zipties to manage hoses, wires, ect.
Thanks for any input.