I am getting close to having to commit to an electrical system design and I would like to get some feedback. I am going to have an electrically dependent airplane and would like to keep procedures as simple as possible yet incorporate innovative ideas like the VPX. I plan on normal operation with the cross-feed closed and the Aux voltage regulator set lower than the primary.
Do I use a single switch to control the relays for the Eng/Ess buss or do I use 2 different switches to be able to test and isolate?
Do I use a B&C standby regulator for the Aux Gen or the main regulator?
Any other suggestions?
Do I use a single switch to control the relays for the Eng/Ess buss or do I use 2 different switches to be able to test and isolate?
Do I use a B&C standby regulator for the Aux Gen or the main regulator?
Any other suggestions?
![i-pwXx4zw-M.jpg](/community/proxy.php?image=https%3A%2F%2Fphotos.smugmug.com%2Fphotos%2Fi-pwXx4zw%2F0%2F9c676dd0%2FM%2Fi-pwXx4zw-M.jpg&hash=579c5349d357a4b25dc68d6d0f45fc5a)