I was recently looking for a compressor for my RV project, and saw this one at my local hardware store:
https://www.lowes.com/pd/Kobalt-QUI...tric-Vertical-Quiet-Air-Compressor/1000405189
I was interested in it due to the low sound advertised (<70dba)
However, the CFM output at 90psi was rated at only 4.5CFM.
I'd planned to use my compressor mostly for riveting as I have a great electric drill. But I was wondering what this output support. Will it support riveting, drilling, and light cutting? Or do I need to get a compressor with a higher CFM output.
And yes, I've spent way too much time searching this topic on VAF, great discussions, by the way!
https://www.lowes.com/pd/Kobalt-QUI...tric-Vertical-Quiet-Air-Compressor/1000405189
I was interested in it due to the low sound advertised (<70dba)
However, the CFM output at 90psi was rated at only 4.5CFM.
I'd planned to use my compressor mostly for riveting as I have a great electric drill. But I was wondering what this output support. Will it support riveting, drilling, and light cutting? Or do I need to get a compressor with a higher CFM output.
And yes, I've spent way too much time searching this topic on VAF, great discussions, by the way!
Last edited: