[Calvin25]

I'm attaching the counter weight to the top of the rudder. Plans call for the washers to be AN910-10. This is a typo or im breathing too much primer?

Do they mean AN960-10??

 

[Bob Axsom]

You Must Be Right

AN960 is the common aircraft washer part number, add a "D" for aluminum. the dash ten (-10) is for #10 screws and other 3/16" dia. fasteners like AN3 bolts. Add an "L" for light or thin washers. AN960-10 is a standard or thick steel washer for 3/16" fasteners. AN910 is a pipe thread coupler.

Bob Axsom

 

[GAHco]

Washer Info!

Tech page

http://www.gen-aircraft-hardware.com/amelia/details.asp?store=&id=522&TName_HID=subcat

Don't forget to click on the PDF Icon once you have opened the above link!

 

[Calvin25]

Thanks guys! The plans call for a AN910-10.... It is a typo.

They threw this nooby for a loop.

 

[Geico266]

Good catch.

Send Vans an e-mail.