comfortcat Well Known Member Friend Jul 26, 2014 #1 I see a ton of wire heading to the dynon intercom, with many grounds. Anyone have a picture of how they got all that wire connected? advTHANKSance CC
I see a ton of wire heading to the dynon intercom, with many grounds. Anyone have a picture of how they got all that wire connected? advTHANKSance CC
MikeyDale Well Known Member Jul 27, 2014 #2 Take a deep breath. Take your time. Say a prayer. And get it done! http://4.bp.blogspot.com/-Wzvcy1iT9ww/UmK13zV2-qI/AAAAAAAAAcs/m7Qa-v_ZSXs/s1600/20131017_082926.jpg http://2.bp.blogspot.com/-rPbNrNR4ZbA/UmK18lP-94I/AAAAAAAAAc0/L8o_EIbxHfs/s1600/20131019_111643.jpg
Take a deep breath. Take your time. Say a prayer. And get it done! http://4.bp.blogspot.com/-Wzvcy1iT9ww/UmK13zV2-qI/AAAAAAAAAcs/m7Qa-v_ZSXs/s1600/20131017_082926.jpg http://2.bp.blogspot.com/-rPbNrNR4ZbA/UmK18lP-94I/AAAAAAAAAc0/L8o_EIbxHfs/s1600/20131019_111643.jpg
az_gila Well Known Member Jul 27, 2014 #4 Different Back Shell If you use this style of Mil-Spec back shell with a flat clamping area it will be easier getting all of the wires and ground daisy chains in. The hardest part may be remembering to slip the one-piece back shell over the bundle before inserting the contacts into the connector. Digi-Key has them http://www.digikey.com/product-detail/en/DB24659/1003-1051-ND/2403827 I believe Garmin uses a similar style for some of their avionics trays.
Different Back Shell If you use this style of Mil-Spec back shell with a flat clamping area it will be easier getting all of the wires and ground daisy chains in. The hardest part may be remembering to slip the one-piece back shell over the bundle before inserting the contacts into the connector. Digi-Key has them http://www.digikey.com/product-detail/en/DB24659/1003-1051-ND/2403827 I believe Garmin uses a similar style for some of their avionics trays.
comfortcat Well Known Member Friend Jul 27, 2014 #5 Perfect!!! Thanx guys! This is exactly what I needed. Now, just make it work for me... BTW: Even if I do not have the radios attached yet, can I still test the intercom with two headphones and power to the unit? Dkb
Perfect!!! Thanx guys! This is exactly what I needed. Now, just make it work for me... BTW: Even if I do not have the radios attached yet, can I still test the intercom with two headphones and power to the unit? Dkb