[Toobuilder]

Very basic question and I cant seem to come up with the right search terms to find the answer.

I'm installing a D-180 in the Rocket but I want to retain my D-10A for a while as a backup EFIS. Assuming the D10 is a slave in the DSAB network, do I need to duplicate all inputs to both EFIS, or can I get away with just power, pitot and the two DSAB inputs for the -10?

Thanks

 

[Raymo]

I would suggest asking this on the Dynon Forum, which they monitor more closely.

http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl

 

[flightlogic]

Pretty sure the DSAB is a network of sorts. You should not have to duplicate the inputs. But, as mentioned... ask Ian at Dynon if you want the expert.
And the documentation can be downloaded easily.