Michael Burbidge
Well Known Member
My engine has slick mags. I've looked around a bit and cannot find information on which terminals on the mag are for what. I understand and have read the information about how to wire the mag to the switch, etc. I just don't know which screws on the magneto are for ground and which for the p-lead.
Here's a picture of my magneto. I've labeled each of the screws with what I think they're for.
I'm guessing the nut with the fabric washer is where I connect the p-lead. I've labeled that P-Lead. The screw marked GND is actually marked GND on the magneto. I'm guessing that is ground and where I would wire to ground on the mag. The one that confuses me is the one which I've labeled "Unknown". What is that for?
The screws appear to be torx drive. Do you happen to know what size?
Thanks for the help,
Michael-
Here's a picture of my magneto. I've labeled each of the screws with what I think they're for.
I'm guessing the nut with the fabric washer is where I connect the p-lead. I've labeled that P-Lead. The screw marked GND is actually marked GND on the magneto. I'm guessing that is ground and where I would wire to ground on the mag. The one that confuses me is the one which I've labeled "Unknown". What is that for?
The screws appear to be torx drive. Do you happen to know what size?
Thanks for the help,
Michael-