BillL
Well Known Member
Joking aside, I have been working on the fuse side wiring for a long time and had thought I had enough wire length for forward fuse bundles. I may yet be OK as I work with the finer details, but here is a picture of the problem and a suggested planning tool for you builders not yet to this stage.
The suggestion is to make a fence, around which you can pull your wires, and ensure that there is enough wire length.
If anyone has been in this situation, I would welcome your suggested solutions. My options are to work with the bundles to get them "longer" or to make a new tunnel cover with a large radius allowance for these bundles like they are.
Thanks,
The suggestion is to make a fence, around which you can pull your wires, and ensure that there is enough wire length.
If anyone has been in this situation, I would welcome your suggested solutions. My options are to work with the bundles to get them "longer" or to make a new tunnel cover with a large radius allowance for these bundles like they are.
Thanks,