[gator]

Getting ready to route all the wires and pitot tubes from the wings into the fuselage and wondered where others have brought them into the fuselage? Is it possible to route wires and tubes through the existing holes for the aileron pushrods since some holes are already provided in the wing ribs just aft of the spar?

 

[grover]

drill

I put additional holes near the existing ones for aileron tubes. didn't want wires that close to flight controls. used the plastic bushing things. holes must be far enough aft such that the rear seat foot holder thing will not interfere with routing as the wires penetrate the fus.