[BravoAlphaRomeo]

Anybody familiar with this lightning hole wire mount ? Requires no screws and accepts a cable tie. I checked Mouser and Digikey - no joy.

 

[PhatRV]

I avoid mounting anything though the lightening holes because the aileron pushrods go through them and to avoid possible binding. In my airplane, I expanded the small reference hole to fit the larger snap bushings and route cables through them.

 

[spatsch]

View attachment 54149Anybody familiar with this lightning hole wire mount ? Requires no screws and accepts a cable tie. I checked Mouser and Digikey - no joy.

Looks like something which will get sooner or later brittle and break. Why not just put another hole in the rib and use a bushing?

Oliver

 

[andoman]

Looks like something which will get sooner or later brittle and break. Why not just put another hole in the rib and use a bushing?

Oliver

+1. Use the existing unused hole.

 

[BravoAlphaRomeo]

I don’t really need it in my wing, just stuck it there to take a picture of how it clips onto a flanged hole.….
Thanks,

 

[tthrew]

Mouser PN: 523-ALBCBS3045909

 

[BravoAlphaRomeo]

Tim - you are a genius !
At over 8 bucks per mount not really sure how badly I want them - but thanks nonetheless