[Piper J3]

I want to install a second comm PTT switch. Does anybody know Tefzel wire gauge for this application?

Thanks in advance...

 

[Mel]

PTT current draw is practically "nil". Pretty much any size wire will work.
I personally won't use anything smaller than 20 ga. just because of workability.

 

[Walt]

As Mel said but personally I use 22 ga for all signal wires, 22 is the smallest gauge I use.

 

[Jesse]

I would go with 20 or 22 awg as well.

 

[Piper J3]

Thanks guys. 20 AWG wire is on order. I didn't realize that Tefzel is a little pricey...

 

[RFSchaller]

I installed a comm 2 and used 22 gage wire for the PTT. works great!

 

[Piper J3]

Does the second PTT switch wire in parallel with Pilot's PTT or does it go back to the comm radio as a separate input? I think I've seen it shown both ways. I think it would be easier / cleaner just to wire in parallel with the existing switch.

 

[RFSchaller]

I kept my wiring entirely independent of the original caomm. It has a dedicated PTT on the panel.