[flickroll]

I'd like to drill a 5/8" hole in F-806, between F-813-L and F-815B-L. This is a rather large wire bundle for a bunch of stuff I mounted in the back. The hole WOULD NOT cut into F-806 C or D. It would be in the web material above F-806-C & D. I really don't see aproblem as the rudder cable holes are drilled in the same bulkhead just 8" or so away, but wanted to see if anyone had any advice. I do plan to call Van's tomorrow for their opinion. Thanks

Jim Shannon
RV-8 N52VV
Chaerlottesville, VA