[Pat Stewart]

Yesterday we put the wings on. I found it a little difficult especially for an airplane designed to do this with two people in a few minutes. The fit through the slot in the side of the fuselage was a little tight and getting the wing in that last 1/16 was also difficult. Curious if those who already done this learned any tricks to this process.

Pat

 

[Alex Edwards]

Yesterday we put the wings on. I found it a little difficult especially for an airplane designed to do this with two people in a few minutes. The fit through the slot in the side of the fuselage was a little tight and getting the wing in that last 1/16 was also difficult. Curious if those who already done this learned any tricks to this process.

Pat

Check that the top of the spar is not rubbing on the F1204H bulkhead caps. Mine was but a very gentle file and all is good. See area circled in red below.

 

[Mich48041]

Read these threads about easy ways to install the wings:

http://www.vansairforce.com/community/showthread.php?t=77604

http://www.vansairforce.com/community/showthread.php?t=69914

http://www.vansairforce.com/community/showthread.php?t=118944

 

[Pat Stewart]

Thanks guys,

I appreciate the feedback.

Pat