[funflying]

I have 4 pieces of black stick-on material, 2 of one size and 2 the same width but about an inch or so longer. 2 go on the wings and 2 on the interior step area.

From those who have experienced this application which goes best where? And again thanks to those who have gone before me so I might learn from their experience!

 

[Paris12Man]

Ultra Wing Walk

Something to think about.... I used the Ultra Wing Walk material offered by Aircraft Spruce. I couldn't be happier. Very easy to use and will last a long time. You can put it on your step also.

http://www.aircraftspruce.com/catalog/cspages/ultrawingwalk.php

Steve

 

[vfrazier]

wing walk material

Not gritty. Easy to keep clean. I've had this on my plane for 10 years and it still looks like new.

 

[Bill_H]

I used the AC Spruce wing walk paint-on stuff because I wanted protection closer to the leading edge of the wing than the stick-on pieces would provide. It also worked much better when covering rivets. Very happy with how it came out. I did use pieces of the peel-and-stick for the steps.

 

[funflying]

Thanks all

I will look into some of these other options!

Also Vans enlightened we to section 33 Misc. and it is posted there about applying the provided non-skid material. I still will look at some of the previously posted options.