Struggling with the wing tips. History: the tips are 10 years old and I am the second owner and just to the point of installing them. I can’t seam to find a lot of instruction on these other then the small amount about centering them on the aileron TE and put the tip rib in. I can’t find a location or measurements for the install location for this rib. I am also fighting the fact that the tips may not have been stored correctly as the TE is twisted about 2” up near the aileron. I trimmed the TE level with the TE of the aileron and I have been moving the tip rib around trying to get the tip to match the thickness of the aileron so it looks good. This has been a struggle.