dick seiders
Well Known Member
Maybe missed it , but for those who have painted their wings I would like your experience in supporting the wings for painting. The spar end is pretty obvious if painting wing in a vertical position, but how to support the tip end is the question. Is a 2x4 slid thru the handhold the best way, or is it better supported by blocking up the flat (w/o the flaperons on of course) trailing edge? Also, what other methods are there? Any and all suggestions are welcome. Thanks.
DickSeiders
ps. I haven't reported on fuel tank test results yet as I have not yet done the (5th) test.
DickSeiders
ps. I haven't reported on fuel tank test results yet as I have not yet done the (5th) test.