Finally got my wing kit a couple days ago... And of course, someone decided to drive a forklift through the end of the crate.
Trying to get an idea of all the parts that I'm going to need to get from Vans, so I can work on my claim through the shipping company. Besides the couple of nose ribs that are obviously needing replacing, I'm curious about these small pieces of angle that are bent, W-925B-L and W-925B-R.
When I pulled the first set out, I figured they were needing replacement. But when I pulled out the second set and saw they were pinched in the exact same way, but mirrored, I started wondering if this was right. From what I've seen in my research in plans and on others blogs, the bend is not normal.
Thanks for any assistance.
Trying to get an idea of all the parts that I'm going to need to get from Vans, so I can work on my claim through the shipping company. Besides the couple of nose ribs that are obviously needing replacing, I'm curious about these small pieces of angle that are bent, W-925B-L and W-925B-R.
When I pulled the first set out, I figured they were needing replacement. But when I pulled out the second set and saw they were pinched in the exact same way, but mirrored, I started wondering if this was right. From what I've seen in my research in plans and on others blogs, the bend is not normal.
Thanks for any assistance.