omrsramsay
Member
I should have asked here first. I couldn't find a suitable jack, so I made my own. What are RV owners using for jacks?
http://tinyurl.com/RV3-Jack
http://tinyurl.com/RV3-Jack
Last edited:
I haven't addressed this yet, but I was thinking about getting one of these, then bolting up a wooden box to bridge the gap between the top of the jack and bottom of the wing. I'd put a chunk of 2x6 on top of the box, and drill a hole in it to index a bolt fitted to the wing tie-down socket. The 2x6 would be under the spar, of course, to distribute the load.
What do you think? And what's the typical dimension from the ground to the underside of a -9A wing?
http://www.harborfreight.com/1500-lb-capacity-atvmotorcycle-lift-60536.html