RVG8tor
Well Known Member
On the -8A the bottom nuts on the wing bolts are difficult to get to and you have to get the nut started before the bolt is all the way through. There will not be an easy way to remove this bolt if another washer needs to go under the nut. A washer will go under the bolt head since this will be how the thing it tightened.
My question for any -8A builders out there did you need any washers under the nut as well? I don't want to get the nut started then as the nut goes on and the bolt get hammered in further then to realize I need a washer.
Thanks for any help.
Cheers
My question for any -8A builders out there did you need any washers under the nut as well? I don't want to get the nut started then as the nut goes on and the bolt get hammered in further then to realize I need a washer.
Thanks for any help.
Cheers