Lycoming was nice enough to include a fuel line with their engine and it's neatly mounted out of the way.
However, I need to remove it to install the two piece Vans line plus fuel flow sensor. I can't get tools in there to get the clamp off but I can easily get ot the case bolt.
My question/concern is I don't know if this bolt is pressed in and if I unscrew it to get that bracket off will it just fall into the case.
Might be a dumb question, it may just be pressed in, tons of experience with Harley engines, but this is new territory for me and a loose bolt in the case sounds like a 6 month heart breaking project stopping pool of sadness that I don't want to end up in so I'm checking first
However, I need to remove it to install the two piece Vans line plus fuel flow sensor. I can't get tools in there to get the clamp off but I can easily get ot the case bolt.
My question/concern is I don't know if this bolt is pressed in and if I unscrew it to get that bracket off will it just fall into the case.
Might be a dumb question, it may just be pressed in, tons of experience with Harley engines, but this is new territory for me and a loose bolt in the case sounds like a 6 month heart breaking project stopping pool of sadness that I don't want to end up in so I'm checking first
![oTH.jpg](/community/proxy.php?image=http%3A%2F%2Fhalie.com%2Fscale%2F15%2FoTH.jpg&hash=ff384904b2ac0bcf5ead6562d8416de2)