AX-O

Well Known Member
I am having a hard time finding these parts. I know I am doing something wrong because these parts are common. All parts are for a Lycoming O-320. I would like to purchase all this from the same place. Also would like to find the bolts with holes on the head for safety wire.

Oil Filter Gasket
Fuel Pump Gasket (p/n 60096)
STD-33 Plain Washer 3/8 inch
STD-1882 Screw 3/6-16X1 9/32
STD-8 Plain Washer 1/4 inch
STD-160 Lock Washr 1/4 inch
STD-1856 Screw 1/4-20X1.0 Hex

Thanks for any help or guidance.
 
Here's what I saw at the Aeroinstock.com website...

http://www.aeroinstock.com
GRANITE CITY, IL: (800) 362-3044 - WEST CHICAGO, IL: (800) 910-1281 - BATH, PA: (800) 831-5454

Shopping Cart
SCREW Item #:STD-1856 $2.47
WASHER Item #:STD-33 $0.80
SCREW Item #:STD-1882 $10.86
WASHER Item #:STD-160 $0.61
WASHER Item #:STD-8 $1.21
GASKET Item #:60096 $1.01

Put your part number in their search engine.
 
A.E.R.O. Granite City IL 800-362-3004

Ask for Deb. Tell her I sent you! She is great and understands customer service. Also try Tim Krieder at Spruce East will call. Great guy with a boatload of knowledge and outstanding customer service!
 
Call Lycoming

I called Lycoming. I was having a problem finding a special washer used for the injector and found out Lycoming did away with them and replaced them with 5/16 star washers. The folks there are very friendly and will work with you.

Good Luck.
 
Aviation supply section of your nearest hardware store. The STD nuts and bolts specified by Lycoming are grade 5, while the stuff you can get locally is grade 8 thus having higher ultimate yield strength.