Rion Bourgeois Member Patron Nov 10, 2008 #1 Does anyone know of a source for a wheelpant for the Bell tailwheel fork? Any leads would be appreciated.
Does anyone know of a source for a wheelpant for the Bell tailwheel fork? Any leads would be appreciated.
Andy Hill Well Known Member Nov 10, 2008 #2 Errrr... may one ask why? One of the principal advantages of the Bell Tailfork is the increased Ground Clearance... which in turn, if/when required, would remove any "Wheelpant"... Just curious
Errrr... may one ask why? One of the principal advantages of the Bell Tailfork is the increased Ground Clearance... which in turn, if/when required, would remove any "Wheelpant"... Just curious
vfrazier Well Known Member Nov 12, 2008 #3 A Van's tailwheel pant will fit on my tailwheel fork with minor mods. Here's a link to a photo: http://www.vincesrocket.com/tailwheel pant.JPG Yes, it does lose a bit of clearance, but the handling is still much improved over the stock Van's tailwheel. My tailwheels and many other nifty RV products can be seen on the web store link below. Vince Frazier Flyboy Accessories 3965 Caborn Road Mount Vernon, IN 47620 812-464-1839 www.flyboyaccessories.com
A Van's tailwheel pant will fit on my tailwheel fork with minor mods. Here's a link to a photo: http://www.vincesrocket.com/tailwheel pant.JPG Yes, it does lose a bit of clearance, but the handling is still much improved over the stock Van's tailwheel. My tailwheels and many other nifty RV products can be seen on the web store link below. Vince Frazier Flyboy Accessories 3965 Caborn Road Mount Vernon, IN 47620 812-464-1839 www.flyboyaccessories.com