T

Triumph1974

Well Known Member
Hello Everyone with an A model,

Just wanted to get some feedback on the various grease builders are using in their nose wheel forks. Is everyone using basically the same grease (Mobil 1 red synthetic is what comes in the Cleveland main wheel bearings kit ) that they used in the wheel bearings to ensure that freezing is not an issue?

Thanks,
Paul
 
The Grummans with a near identical nose gear swivel system call out a Mil Spec. which is met by Aeroshell Grease 22 or Mobil Grease 28 - easy to obtain.

It's call out is different from the wheel bearing grease.

http://www.qclubricants.com/aeroshell/aeroshell22.htm

With a temp. range of -85 F to +400 F freezing should not be a problem...:)
 
Last edited:
Triumph1974 said:
Hello Everyone with an A model,

Just wanted to get some feedback on the various grease builders are using in their nose wheel forks. Is everyone using basically the same grease (Mobil 1 red synthetic is what comes in the Cleveland main wheel bearings kit ) that they used in the wheel bearings to ensure that freezing is not an issue?

Thanks,
Paul
Click to expand...

Doesn't Cleveland call out "Mobil Aviation Grease SHC 100" for their wheel bearings?

I think this is a different grease (and much more expensive) than the Mobil 1 stuff.
 
Yes you are right the wheel bearings come packed with Mobil Aviation Grease SHC 100....the high $ red synthetic stuff.

Thanks for sharing the Grumman info....
 
You must log in or register to reply here.