ijustwannafly
Well Known Member
So my wing kit was started by a different builder. He built this rear spar.
Its primed in just some self etching rattle can stuff i don't really care for.
I just ordered 2 gals of akzo
What do you guys think i should do with this. Im afraid to take the primer off with acetone because if its gets between the two pieces it might eat the primer between the parts thats are already riveted. Im obviously not going to buy a new spar nor am i going to drill out all this work and take it apart.
Any thoughts on how I can shoot this with it being half primed already?
Its primed in just some self etching rattle can stuff i don't really care for.
I just ordered 2 gals of akzo
What do you guys think i should do with this. Im afraid to take the primer off with acetone because if its gets between the two pieces it might eat the primer between the parts thats are already riveted. Im obviously not going to buy a new spar nor am i going to drill out all this work and take it apart.
Any thoughts on how I can shoot this with it being half primed already?
![Screen%20Shot%202015-09-25%20at%202.25.22%20PM_zpsjdctv5mh.png](/community/proxy.php?image=http%3A%2F%2Fi1373.photobucket.com%2Falbums%2Fag378%2Fautomagp68%2FScreen%2520Shot%25202015-09-25%2520at%25202.25.22%2520PM_zpsjdctv5mh.png&hash=51d47f165390fccdd5394bad9bf6f2ed)