[comfortcat]

I'm working on the Fuse of my 9A.
I got three pairs of Al Angle 3/4 X 3/4 stock.

I'm now looking for the stock I can cut for building small parts.

I believe the pair of 15' 063 3/4x3/4 is for the Longerons (DON'T CUT THOSE!!!)
But can I cut up the others for the parts I need to build?

There are a pair of 063 3/4x3/4
and a pair of 125 3/4x3/4

Are these for cutting?

Thanx!

Dkb

 

[instructor_bill]

don't cut the .125

the longerons are made from .125 angle

There's a ton of leftover 063 angle but you only have two .125 angle for the longerons.

 

[bruceh]

Some of the extra angle material gets used in manufacturing the seat backs.
There should be plenty extra.

 

[terrye]

What to cut

Have a look through the "RV-9A Parts Index", a printed Excel document in the front of your RV-9A Construction Manual Section 4. I went through this quite a few times matching parts and length callouts in the drawings with material callouts in the parts index.