tonyjohnson
Well Known Member
I am looking at buying a hangar. In addition to my RV8A project I have a Taylorcraft L2 with a wingspan of 35.4 feet.
I am looking at a hangar that is 40 ft wide and 33 deep. It would be a T hangar except that it is on an end and has only one corner obstructed as T hangars do.
I made papercut outs and moved them around on graph paper, but that does not account for the high wing / low wing characteristics.
I would appreciate feedback from those who know the minimum hangar size for a high wing taildragger with a 35.4 ft wingspan and an 8A to cohabitate.
Another option is a lift.
I am looking at a hangar that is 40 ft wide and 33 deep. It would be a T hangar except that it is on an end and has only one corner obstructed as T hangars do.
I made papercut outs and moved them around on graph paper, but that does not account for the high wing / low wing characteristics.
I would appreciate feedback from those who know the minimum hangar size for a high wing taildragger with a 35.4 ft wingspan and an 8A to cohabitate.
Another option is a lift.