Rick6a Well Known Member Nov 30, 2007 #1 Question: As attached by the factory to the OEM Lycoming, what is the (circled) fitting to be used for?
Question: As attached by the factory to the OEM Lycoming, what is the (circled) fitting to be used for?
Kahuna Moderatoring Nov 30, 2007 #2 Usually fuel pressure sensor. It can be capped. Best to do the insert cap directly to the divider as opposed to capping that fitting. Best,
Usually fuel pressure sensor. It can be capped. Best to do the insert cap directly to the divider as opposed to capping that fitting. Best,
N Norman CYYJ Well Known Member Nov 30, 2007 #3 That port is for your back up fuel supply from the back up throttle body. If you aren't using a back up system just cap it off.
That port is for your back up fuel supply from the back up throttle body. If you aren't using a back up system just cap it off.
Rick6a Well Known Member Nov 30, 2007 #4 Thanks Guys, Just underneath the fitting the word "GAGE" is engraved into the divider. I removed the fitting (shown) and will cap off using a pipe plug. Last edited: Nov 30, 2007
Thanks Guys, Just underneath the fitting the word "GAGE" is engraved into the divider. I removed the fitting (shown) and will cap off using a pipe plug.
