rmartingt
Well Known Member
So my panel layout is finally coming together and I'm looking to get it laser-cut soon so I can start wiring in switches etc. Avionics will be dummy boxes for now so I can do the wiring. But I'm trying to think if I've forgotten anything. What I have provisions for now:
Equipment on the panel:
Dynon 10" display (probably HDX)
AP button and knob panels
Com radio and intercom
IFR GPS
SDS ECU programmer
Blank space for standby attitude (D3?) or cellphone mount
2 dual USB ports for data cards
Alternator warning lights (2)
ELT remote
Switches and controls
Engine bus power (2)
Fuel pumps (2)
Ignitions (2)
ECU select
Starter
Main bus bat/alt
Aux bus bat/alt
Bus tie
Main and aux Alt CBs
Nav
Strobe
Land/recog
Taxi/flood
Pitot heat
Aux fuel transfer (L/R)
Trim power disconnect
AP servo power disconnect
RH stick disconnect
Interior lighting switches/dimmer knobs (4 ea... may not use them all, but I have space them)
Smoke arm
Throttle
Prop
SDS mixture knob
Equipment located elsewhere:
Fuse panels (behind panel)
Headphone jacks (on F-902 bulkheads)
USB/12V power ports (on F-902 bulkheads)
Seat heat switches (location TBD but not on panel)
Tablet mount (under throttle, mounted to pump cover)
On sticks:
Trim
PTT
Com flip/flop
Smoke
Flaps
AP disconnect
Items to add based on feedback:
Smoke on indicator light
Battery fault lights
Maybes:
Alt static source
Standalone slip indicator (ball)
Remote ident button
What am I missing? What have I forgotten?
Equipment on the panel:
Dynon 10" display (probably HDX)
AP button and knob panels
Com radio and intercom
IFR GPS
SDS ECU programmer
Blank space for standby attitude (D3?) or cellphone mount
2 dual USB ports for data cards
Alternator warning lights (2)
ELT remote
Switches and controls
Engine bus power (2)
Fuel pumps (2)
Ignitions (2)
ECU select
Starter
Main bus bat/alt
Aux bus bat/alt
Bus tie
Main and aux Alt CBs
Nav
Strobe
Land/recog
Taxi/flood
Pitot heat
Aux fuel transfer (L/R)
Trim power disconnect
AP servo power disconnect
RH stick disconnect
Interior lighting switches/dimmer knobs (4 ea... may not use them all, but I have space them)
Smoke arm
Throttle
Prop
SDS mixture knob
Equipment located elsewhere:
Fuse panels (behind panel)
Headphone jacks (on F-902 bulkheads)
USB/12V power ports (on F-902 bulkheads)
Seat heat switches (location TBD but not on panel)
Tablet mount (under throttle, mounted to pump cover)
On sticks:
Trim
PTT
Com flip/flop
Smoke
Flaps
AP disconnect
Items to add based on feedback:
Smoke on indicator light
Battery fault lights
Maybes:
Alt static source
Standalone slip indicator (ball)
Remote ident button
What am I missing? What have I forgotten?
Attachments
Last edited: