[Trevor778]

Just inventoried my tail kit. All was good except for this

Let me know what you think. I'm assuming just bend it back to straight and continue on. Just thought I'd get a little insight. Merry Christmas to all, and thanks in advance for your responses.

Trev

 

[Kyle Boatright]

Yep, bend it back straight, you'll be fine.

 

[lorne green]

Build on

Yep, bend it back straight, you'll be fine.

That's nothin'.
Now. if it was crimped or creased....but it's not, so build on.

 

[LifeofReiley]

Roll it right out... heck, you could have half of the emp together by now.

 

[Trevor778]

Those are the responses I was expecting. Much appreciated guys. And Lorne, I see you're wiring. Any questions you have, I'm an AME E for Maxcraft Avionics down here on the coast so don't hesitate to ask. Thanks again.

 

[lorne green]

Those are the responses I was expecting. Much appreciated guys. And Lorne, I see you're wiring. Any questions you have, I'm an AME E for Maxcraft Avionics down here on the coast so don't hesitate to ask. Thanks again.

Be careful Trevor, I will take you up on that offer!
Thanx